Ceiling Frame Cold Roll Forming Equipment light guage roll forming
machine with none stop cutting
Descrip
The suspended ceiling framing t grid roll forming machine is also
called T bar suspended ceiling grid making machine.The T bar is a technical profile for supporting suspended ceiling
panels (T-grid suspended ceiling), usually sized 60x60cm and
60x120cm. This highly technical system consists of three different
profiles with length 600, 1200 (cross tees) and 3600mm (main
runner) although many other sizes exist on the market like the
Imperial system.
Components of line
NO | Name | Unit | Qty |
|
1 | Man-made decoiler | set | 2 | - Max width 300mm
- Inner diameter -460-510mm
- Max loading capacity 1000kg
- Manual operating type manual expansion to tighten the coil
- Break down drive whole line stop while decoiler idle
|
2 | Feeding Table | set | 1 |
|
3. | Forming Rollers | set | 1 | - Forming Station 16 nos
- Forming Rollers material Cr12
- Forming Rollers hard treatment HRC 58-60
- Shaft of roller Diameter 40mm
- Shaft material 40Cr,heat treatment, refine grinded
- Machine frame: steel welding
- Main sidewall thickness 25mm
- Machine driven by universal joints via gearbox
- Roll forming motor 5.5kw with frequency inverter controller
- Gearbox RV worm gearbox
|
4. | Hydraulic cutting with hole punching | set | 1 | - Hydraulic pump stand 1 set
- Hydraulic Components taiwanese
- Hydraulic System discharging protection with wind cooler
- Edge cutting 2 sets both ends
- Middle joint hole punching 23sets/152.4mm
- Fire testing hole 2 sets both ends
- Mould standard SKD-11 Steel Japanese
- Mould frame&plate S45C
- Mould pin SKH-9 steel Japanese
- All mould treatment By slow-feeding Nc wire cutting
|
5. | Profile Discharger | set | 1 | - Driven machinical Auto Head
- Operation Full automatic along with forming machine
|
6. | Electric Control system | set | 1 | - Frequency converter Silin ,Taiwanese
- PLC Fatek ,Taiwanese
- Touch screen weinview Taiwanese
- Profile length cutting forming machine stops then cut
- Operational controller: touch screen knob switch emg
Brake down and so on (6)Power supplier 380V 50Hz 3phase |
Applications:
1. Any small problems will be solved at the most prompt time.
2. We always offer relateive technical support,quick response,all
your inquire will replied within 24 hours.
3. We can delivery your goods within 25 workdays.
4. OEM service.
Competitive Advantage:
1 This production line is full automatic-------could save working
time and reduce the cost.
2 New----------new developed automatic Grid production line in
China
3. Ceiling mould is perfect------------could use 10 years or long
4. Price --------------is reasonable (welcome you send mail for
asking the price)
5. Technic support------------10 years technican give you strong
and timely support
FAQ
1. Q: What is the MOQ?
A: 1 set.
2. Q: What is the Delivery time?
A: Within 25 workdays.
3. Q: What is the Payment terms you can accept?
A: T/T or L/C.30% deposit,and before shipped we hope to receive the
balance 70%.Also 100% L/C is accepted.
4. Q: What is the Warranty?
A: Within 12 mounts,all of the technical personnel are ready to
serve you at any time.
